Model |
T3246N |
Applicable fiber |
SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657) |
Fiber count |
Single |
|
|
Applicable fiber |
Cladding diameter: 80 -150μm, Coating diameter: 160 – 900μm |
dimensions |
|
|
|
Typical splice loss |
0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) |
|
|
Return loss |
>60db |
|
|
Fiber cleaved length |
10-16mm (coating diameter< 250μm ), 16mm(coating diameter: 250-1000μm ) |
|
|
Splicing program |
40 groups |
|
|
Operate mode |
Manual, Automatic |
|
|
Auto-heating |
Available |
|
|
Typical splicing time |
8 seconds |
|
|
Tube heating time |
26 seconds for 60mm and 40mm shrinkable sleeves |
|
|
Fiber view magnification |
250X(X or Y view), 125X(X and Y view) |
|
|
Display |
4.3 inch color LCD monitor |
Storage condition |
Temperature -40 to 80℃, 0-95% relative humidity, battery -20-30℃ |
|
|
Compatible Fiber /Cable |
0.25~3.0 mm/ Indoor Cable |
Automatic calibration |
Automatic arc calibration by air pressure and temperature |
Protection sleeve length |
40mm, 60mm, S0C-9.0 & micro sleeve |
Storage of splice result |
4000 results |
|
|
Loss evaluation |
Available |
|
|
Tension test (Pull Test) |
1.8-2.2N |
|
|
Interface |
GUI menu interface, easier operation |
|
|
Cameras |
2 CCD cameras system |
Battery capacity |
5800mAh, typical 200 cycles(splice and tube heat), pluggable inner Li-battery |
|
|
Power supply |
Adaptor, input: AC100-240V(50/60HZ) |
|
|
Electrode life |
More than 4000 ARC discharges, can be replaced conveniently |
|
|
Data Output |
USB 2.0 port, for uploading splice results and upgrading software |
|
|
Operating condition |
Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: |
max 15m/s |
|
|
|
Dimension |
149mm(L)x120mm(W)x127mm(H) |
|
|
Weight |
1.4kg without battery/ 1.9 kg including battery |
|
|